General Tips
With your skis or board held firmly in place (base side up) rub the wax over the base making slightly over lapping passes from the tip to tail. Begin blending the wax into the base by rubbing it with the cork using moderate pressure from tip to tail. The wax will start to disappear into the base with the more strokes you make with the cork. Once finished with the corking the bases should be buffed with a Horsehair brush with repeated strokes from the tip to the tail until a slight shine can be seen on the base. Continued strokes with the cork will force wax absorption into the base. We always recommend you cork in rub on graphite additives as well as speed overlays.
